Ford patient transport ambulance was manufactured in order to transport the patients after hospital and dialysis. The devices and medical equipment, which are compatible with En1789 norms, are placed in the ambulance. There are an extra chair stretcher, spine board, and scoop stretcher for the purpose of carrying a patient.
There are a main stretcher and a carrying platform in the middle of the ambulance cabinet. It is possible to carry one more patient by tilting the right seat about 160 degrees.
Patient Transport Ambulance Equipments
The ambulance has its own air-conditioner and external heater.
It is possible to unload patients from the right side sliding door and the back door.
The right side door of the ambulance is formed as sliding. The back door is swivel. The ambulance main stretcher can be easily entered the ambulance via a ramp from the back door. The internal sides of both of the doors are covered with reflective coatings that can be easily seen in case the doors are opened. Both of the doors have been manufactured as being airtight and they prevent dust from entering into the vehicle.
There is an audible and illuminated warning system in order to warn the driver in case the driver or patient cabin unintentionally opened.
The ground of the ambulance is covered with an antibacterial floor covering. Under the ground covering is coated with 20mms MDF wood material. There is a material that is produced from glass fiber wool under the ground covering in order to provide heat and sound insulation.
The floor covering of Ford patient transport ambulance is made by pouring and using composite material. It is possible to rise through the side walls about 5-10 cms on the floor covering. Impermeability is provided owing to the isolation and the applications. It is possible to clean the floor by water-based cleaning elements easily.
Internal sides of the patient cabinet are smooth in terms of health and it can be cleaned easily. Coverings used in the ambulance formed as white and they don’t make any camber. The whole junction area is smooth and it doesn’t cause leaking out. The ambulance coverings are manufactured as one-piece and they mounted to the ambulance.
The cabinet colors of ford patient transport ambulance are produced as being orange or turquoise; in fact, they can be changed depends on the customer requirements and preferences.