Mercedes Ambulance Specifications

Mercedes Ambulance Specifications; By combining a perfect use of inner space with compact outside dimensions, the our Ambulancemed EOW emergency ambulance is light, very maneuverable and perfectly meets the requirements of the EN 1789 for an emergency ambulance type C. In our Mercedes Ambulance all of necessary materials and medical equipment required for the treatment of emergency patients and during rescue operations are safely stored and are easily accessible. Furthermore according to the stretcher table, the patient compartment is equipped with 2 attendant seats and a carrying chair at the partition wall which is installed in reverse driving direction. According Mercedes Ambulance Specifications; in our Mercedes Ambulance the carrying chair can be easily loaded and unloaded through the rear doors. The patient compartment is comfortably accessed by a large sliding door; this door gives direct access to rescue bags or backpacks. Therewithal our Mercedes Ambulance has extra-large rear compartment on the right side offers more than enough space for medical equipment such as spine board or scoop stretcher.

Thanks to the external compartment below the box body bottom, the material can be easily removed. The patient compartment is easily accessed by two large rear doors. The rear steps are evenly divided over the height, facilitating entering and leaving of the vehicle. Moreover, in the our Mercedes Ambulance a left-side door enables the removal of the ECG unit and mobile suction unit from the outside. So the driver can easily access the medical equipment, without entering the patient compartment. Regarding Mercedes Ambulance Specifications; as Ambulancemed EOW group company we manufacturing ultra-modern processes make sure that the WAS 500 3,88 t meets the highest standards of security and groundbreaking technology. All the warning lights up to all outside and inside working lights are in LED technology which is not only state of the art, but also very low-maintenance and energy efficient.

Exterior

LED working lights
LED warning light bar type Rauwers-Legend on the driver’s cab
LED front flashers
LED rear-view mirror flashers
LED front window flasher
Acoustic warning device FS ASX 700 with 2 loud speakers, integrated in the radiator grille
Vehicle rear lights in LED technology
Rear camera integrated in the rear console
Aluminium rear step with suspension
Aerodynamic roof spoiler above driver’s cab with optically extended wind screen
Outside and inside surfaces of the box body with polyester coating, so the surfaces are less sensitive to scratching and easy to clean.

Interior

Large apothecary cabinet with attached medicine cabinet
Removable plate for ampoules, fixed on the lockable
Medicine cabinet
Drawer cabinet with 3 drawers
Two-part thermo compartment with heating and cooling section
Storage compartment for 2 emergency bags (removal from the inside and the outside)
Additional drawer above the compartment
Working surfaces tub-shaped with stainless steel lining
Roof storage compartment above the bulkhead window, with integrated LED lighting
High cabinet for oxygen cylinders (2 x 10 litres and 1 x 2 litres) with access flap to open and read the pressure reducer
Additional storage compartment with 2 flaps, above the oxygen cylinders
Aluminium ceiling center with 2 grab rails and infusion holder for 4 infusion bags
LED spotlight integrated in the ceiling, above the stretcher table
2 attendant seats, rotating and foldable, with integrated three-point-belts
Stretcher table with electrical movement of all positions
LED interior lighting with emergency light and
Blue trauma light
LED lighting at all access doors
Supply conduct with 12 V and 230 V outlets
Oxygen sockets in the supply conduct and in the ceiling center
The vehicle lights are controlled by key buttons, installed on the ceiling center and at the lateral and rear access doors
Camera for the patient compartment
Heat exchanger 7,5 kW, thermostatically controlled.

Special features

Maximum total weight 3,88 T
2 attendant seats in the patient compartment
Patient carrying chair with floor rail in front of the partition wall
Integrated LED rear warning light bar
Extra-large rear compartment door for spine board and scoop stretcher
Access door for the removal of the ECG unit and the mobile suction unit from the outside
Double-hinged doors with automatic door holders and opening angles of 90° and 270°
The medical equipment is stored according to DIN EN 1789
Combination of rear camera and inside camera with a monitor instead of the rear-view mirror.

Base vehicle

Model Mercedes-Benz Sprinter
Type: 319 CDI, 4 x 2, Euro 6
Engine power: 140 kW / 190 hp
Gearbox: 7-speed automatic transmission
Wheel base: 3665 mm
Maximum total weight: 3880 kg
Assistance functions: Crosswind assist and lane assist